Cub

Technical Specifications

Custom Series

Top view of the Athabascan All Weather Pool model

Details

Outside Dimensions: 85’’ x 85’’ | 217 x 217 cm | 7′ x 7′
Height: 41’’ | 104 cm | 3′
Heater(Watts): NA / Euro | 5500 / 2×3600
Water Capacity: 275 Gallons | 1041 Liters
Dry Weight: 741 Lbs | 336 Kg
Wet Weight: 3036 Lbs | 1377 Kg
Electrical Requirements North America
(A = actual / B = breaker):

240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp
3 Pumps / A40amp / B50amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp

Equipment Location

arcticspas Equipment Location Cub

Dimensioned Drawings

Dimensioned Drawings 7'
Dimensioned Drawings 7'
Dimensioned Drawings 7'

Recommended Site Access and Preparation

CUSTOM SERIES WITH FOREVER FLOOR®

Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)